|
Cup
Head Pins |
Our CHP/CHP-ISOL
weld fasteners allow the fixing of insulation material on sheet metal such as airducts in a single operation. Our welding machine ensures a high quality of weld on sheet metal up to a
thickness of several centimetres. Due to long cables and to light weight, this machine is useful for jobsite. This machine uses the capacitors discharge technique and allows clips to be
welded without overheating mark on the opposite side of the metal sheet.
The CHP pin consist of a steel pin firmly mounted on a galvanised steel washer. The CHP-ISOL are similar except that the shank is partially insulated. Thanks to this insulated shank and the
use of the CHP gun, it is possible to fasten aluminium faced insulation.
|
Ř D : 2,7 mm
|
L = 12 - 370 mm
|
|
Washer material
Pin material
- Coppered steel
- (Zinged steel)
|
|
|
Weldfasteners CHP
- Pins diameter 2,7 mm coppered coated (zinged on request)
- Lengths from 12 to 370 mm
- Standard washer head with external diameter 30 mm
- Optional washer head with external diameter 38 mm
|
Weldfasteners
CHP-ISOL
- Same characteristics as CHP but with partially insulated shank.
- Optional : PAP, with insulated paper under the washer.
|
|
|
Welding
Machine NOMARK 66-CHP
- Capacitance : 66 000 µF
- Power supply : 220 Volts / 50 Hz / 5 A
- Length of the gun cable : 10 m
- Length of the ground cable : 5 m
- Weight of the machine without gun :
12 kg
- Size : 165 x 380 x 250 mm
- Studwelding machine in accordance with European Union norms and directives
- Optional welding gun allows this machine to weld CFN pins (on request)
|