THOMAS Welding Systems SA
ZONE INDUSTRIELLE, 3EME RUE Tél : +32 71.91.97.60
B. 6040 JUMET (BELGIUM) Fax : +32 71.91.96.71
Sales Contact : Email
    BE  FR  LU 
 
NOMARK 66 / 88 : Capacitor discharge stud welding equipments
  • This new line of Capacitors Discharge stud welding equipments incorporates the latest solid state technology into a compact and rugged CD Stud Welder
  • This unit has the capacity to weld studs ranging from 3 mm through 8 mm (10 mm) full flanged studs and pins (including cupped head pins)
  • The monitoring of all functions is clearly displayed by LED on the front panel. The short charging cycles increase productivity.
  • Inverter power modules replace traditional heavy transformer rectifiers, are more efficient to use and faster to charge.
  • Lightweight and easily portable, the NOMARK 66 weighs in at around half of many other conventional studwelding equipment
  • Thermostatically controlled cooling fan in NOMARK 88 for increased efficiency

NOMARK 66 / 88 Capacitors Discharge studs welder with Inverter power module - CONTACT and GAP Method

Unit NOMARK 66 NOMARK 88
Welding range : M 3 - M 8
(M8 in Aluminum and Brass after welding tests)
M 3 - M 8  (M 10)
(M8 in Aluminum and Brass after welding tests)
Weldable Materials : Steel, Stainless Steel, Aluminium, Brass Steel, Stainless Steel, Aluminium, Brass
Welding process : "Contact" and "GAP" "Contact" and "GAP"
Capacitance : 66.000 µF 90.000 µF
Charging : 50-200 V  (UP and DOWN) 50-200 V  (UP and DOWN)
Digital Voltmeter : Yes Yes
Duty cycle : up till 30 studs/min up till 25 studs/min
Energy : 1.320 Ws 1.980 Ws
Mains supply : 230 V - 50/60 Hz - 10 AT 230 V - 50/60 Hz - 10 AT
Size (w x h x l) : 195 x 265 x 400 mm 195 x 265 x 400 mm
Weight : 12 Kg 13,5 Kg
 
CHP stud welding guns for Cup Head Pins
  • The small and very handy CHP gun is a special innovative welding gun for directly welding Cup Head Pin through heat insulating jackets in a single operation

CHP Gun for welding Cup Head Pin through heat insulating jackets

Gun  CHP  
Welding range : Cup Head Pins  
CHP Length : Any  
Welding process : Contact  
Front plate : Ø 80 mm  
Settings : Infinitely adjustable  
Kit for CHP-ISOL
(for aluminum faced insulation)
: Included  
Cables length : 10 meters (highly flexible)  
Weight : 0,9 Kg. (without cable)  
 
CHP stud welding guns for Cup Head Pins
  • The small and very handy C0CHP gun, based  on C0 gun, is a special innovative welding gun for directly welding Cup Head Pin through heat insulating jackets in a single operation

C0-CHP Gun for welding Cup Head Pin through heat insulating jackets

Gun  C0-CHP  
Welding range : Cup Head Pins  
CHP Length : Any  
Welding process : Contact  
Front plate : No  
Settings : Infinitely adjustable  
Kit for CHP-ISOL
(for aluminum faced insulation)
: Optional  
Cables length : 8 meters (highly flexible)  
Weight : 0,7 Kg. (without cable)